Technical data
Safety extra-low voltage SELV or
Extra-low voltage PELV
External fusing (compulsory)
External fuse protection for secondary
current: Slow blow fusible link Max. 10
A,
circuit breaker Max. 13 A type C, or
transformer with secondary current
limitation of max. 10 A
64MB SDRAM / 32MB FLASH
(96MB total)
Data backup in event of power failure
Battery Backup of realtime clock
Lithium CR2032 (field replaceable)
Battery operation (cumulative): 1 month
Without load: 10 years
Battery backup for SDRAM
1 x FR6/AA Lithium (field replaceable)
Battery operation (cumulative): 1 month
Without load: 10 years
Interfaces, communication
PXC001.D PXC001-E.D
LonWorks FT5000 Transceiver
Twisted Pair, 78 kBit/s
(Screw terminals)
IEEE802.3, Auto-sensing
10 Base-T / 100 Base-TX
(HMI, Tool)
• PXM20 (BACnet/LonTalk, RJ45)
•
Local Communication
(HMI)
• PXM10 (RS232)
• PXM20 (BACnet/LonTalk) (RJ45)
One PXM10 operator unit and one
PXM20 per system controller may be
connected. But not twice the same
KNX (electrically isolated)
Bus topology, bus termination
300, 600, 1200, 2400, 4800, 9600,
19200, 38400
7 or 8 (depending on software)
1 or 2 (depending on software)
None, even or odd
(depending on software)
Xon/Xoff, hardware or none
(depending on software)
9-core standard screened cable
Max. 3 m
7 / 10
Siemens PXC001 System controllers CM1N9223en_01
Building Technologies 2014-04-04