81 / 92
Siemens………………..RDF301, RDF301.50..., RDF600KN, RDF600KN/VB, RDF600KN/S Basic Documentation CE1P3171en
Smart Infrastructure 2020-02-21
5.2.2 Operation and monitoring with ACS
In the ACS program, select Plant, then Open to open the plant.
To start monitoring and operation, select Applications, then Plant operation.
ACS supports parameter settings even during normal operation.
To change a control parameter, select Popcard, then Settings.
· Make sure you have logged on with sufficient access right
· Only control parameter can be changed, no application!
ACS
Parameter settings in
ACS
Note:
To Next Page
Loading...
