Childproof lock en
63
Tip:If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
Water filter
You can use a water filter to minimise
limescale deposits and reduce impur-
ities in the water.
Inserting and activating the water
filter
ATTENTION!
Possible damage to the appliance
due to limescale build-up.
▶
Change the water filter in good
time.
▶
Change the water filter after
2months at the latest.
Note:If "Replace water filter" is
shown on the display, replace the
water filter.
If you are not inserting a new filter,
select "No filter" and follow the in-
structions on the display.
1. Immerse the water filter in a glass
of water and press the sides to-
gether lightly until no more air
bubbles rise to the surface.
→Fig.
3
2. Press .
3. Use or to select "Water fil-
ter" and press .
4. Use or to select "New fil-
ter" or "Replace water filter" and
press .
5. Note:If you are not inserting a new
filter, select "No filter" in the menu
settings.
Push the water filter firmly into the
water tank and press .
→Fig.
4
6. Fill the water tank up to the "max"
mark and press .
7. Connect the milk tube to the milk
system and the suction pipe.
8. Insert the end of the suction pipe
in the drip plate.
9. Place a container with a capacity
of 1litre under the outlet system
and press .
a The filter will be rinsed and the fol-
lowing message displayed: "Rins-
ing complete.".
a The appliance is ready to use.
Tips
¡ You should also change your wa-
ter filter for reasons of hygiene.
¡ With a water filter you need to de-
scale your appliance less fre-
quently.
¡ If your appliance has not been
used for a long time, for example if
you were on holiday, you should
rinse the water filter before use by
dispensing a cup of hot water.
¡ The water filter can be purchased
from retailers or customer service.
→"Accessories", Page55
¡ Learn how to insert the water filter.
→"Inserting and activating the wa-
ter filter", Page63
Childproof lock
Childproof lock
You can lock the appliance, to pro-
tect children against scalding and
burns.
Activating the childproof lock
▶
Press and hold for at least
3seconds.
a The following message will be dis-
played: "Child lock active. To deac-
tivate press "ml" for 3 sec".