Siemens EQ.500 classic - Home Connect Settings Overview

en HomeConnect
66
▶
Keep other persons, in particular
children, away from the appliance.
Notes
¡ You can only start some modes on
the fully automatic coffee machine
itself.
¡ If you start operation on the appli-
ance itself, remote start is automat-
ically activated.
Activating and deactivating remote
start
Requirement:The appliance is con-
nected to your home network and
your mobile device.
1. Press ⁠.
2. Use or to select "Home
Connect" and press .
3. Use or to select "Remote
start" and press .
4. Use or to select "Remote
start on" and press .
a The display shows a legal notice.
5. Read the text right through and
press ⁠.
a The display shows "On".
6. To deactivate remote start, press
"Remote start" and again.
7. Use or to select "Remote
start off" and press .
a The appliance saves the settings.
HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Overview of Home Connect settings
Here you can find an overview of "Home Connect" settings and network set-
tings.
Basic setting Selection Description
Wi-Fi On
Off
Switch off the wireless module with prolonged
absence or to save energy.
Note:In networked standby mode, your appli-
ance requires a maximum of 2W.
Appliance info - Display network and appliance information
Connect to network Connect manually
Connect automatically
Reconnect the appliance to your home network.
Disconnect from net-
work
- Note:You cannot operate your appliance via the
"Home Connect" app without a network connec-
tion.
Connect to app - Connect the appliance to "Home Connect" or ad-
ditional "Home Connect" accounts.
Remote start Switch on remote start
Switch off remote start
Switch remote start on the appliance on and off.
Note:With the "Home Connect" app only switch-
off is possible.