EasyManua.ls Logo

Siemens EQ.500 classic - WLAN Network Setup (Manual); App and Remote Control

Siemens EQ.500 classic
172 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HomeConnect  en
65
Requirement:Your router has a WPS
button. You will find information about
this in the manual for your router.
1. Press ⁠.
2. Use or to select "Home
Connect" and press .
3. Use or to select "Switch
on Wi-Fi" and press .
4. Use or to select "Connect"
and press .
5. Use or to select "autoCon-
nect" and press .
a The appliance starts the connec-
tion process.
6. Press the WPS button on the
router within the next 2 minutes.
a If "Network connection successful."
is shown on the display, the con-
nection process is complete.
Connecting appliance to
WLAN home network (Wi-Fi)
without WPS function
The appliance briefly sets up its own
"Home Connect" network so the mo-
bile device can connect to it. This
connection transfers the network in-
formation of your home network to
the appliance.
1. Press ⁠.
2. Use or to select "Home
Connect" and press .
3. Use or to select "Switch
on Wi-Fi" and press .
4. Use or to select "Connect"
and press .
5. Use or to select "Connect
manually" and press .
a The display shows the WLAN net-
work SSID and the WLAN pass-
word key of the fully automatic cof-
fee machine.
6. Connect the mobile device to the
"HomeConnect" WLAN network
SSID using the WLAN password
key "HomeConnect".
7. Follow the instructions in the
"Home Connect" app.
a If "Network connection successful."
is shown on the display, the con-
nection process is complete.
Connecting appliance to
Home Connect app
When setting up Home Connect, con-
nect your appliance to the Home
Connect app or to an additional
Home Connect account.
Requirements
¡ The appliance is connected to your
home network.
¡ The Home Connect app has been
installed on your mobile device.
1. If you are not currently in the
Home Connect settings, select
"Home Connect" in the basic set-
tings and press ⁠.
2. Use or to select "Connect
to app" and press ⁠.
3. Follow the instructions in the Home
Connect app.
a If "Successfully connected to app"
is shown on the display, the con-
nection process is complete.
Remote start
You can start operation using your
mobile device.
WARNING
Risk of scalding!
A remote start via the Home Connect
app while the appliance is unatten-
ded may cause scalding to third
parties.
Do not reach under the coffee out-
let during the dispensing of drinks.

Table of Contents

Other manuals for Siemens EQ.500 classic

Related product manuals