Siemens FC72x User Manual

Mounting
Station overview
4
15 |
62
Building Technologies
A6V10211094_f_en_
--
Fire Safety
2015
-
12
-
15
4 Mounting
Before mounting and installation, check all the fire detection installation
components visually for damage caused by improper transport and handling.
Figure 1: Unpacking and checking
Components with clear signs of damage must not be used in the station or
operated as fire detection installation components. When assembling the station
and its modules, observe national and local standards and requirements. The
following mounting instructions refer to the specifications of the EN 54 standard
and the manufacturer's recommendations. The site chosen to assemble the station
and associated components must match the planning documents for the fire
detection installation.
C
Cerberus
TM

Siemens FC72x Specifications

General

Loops	2
Display	LCD
Protection Class	IP30
Networkable	Yes
Input Voltage	230 VAC
Relative Humidity	≤ 95 % non-condensing
Communication	Ethernet