DACT Compatible Alarm Communicators
The FC901-U3/-R3 DACT is also compatible with Alarm communicators that utilized different
communication technologies (IP and GSM technologies) to connect to compatible Receivers
using compatible protocol listed within this documentation.
COMPATIBLE ALARM COMMUNICATORS
Number
Technology
Part Number
NOTE:
DACT is configured with the alarm communicator for other transmission
technologies, off-premise signaling for UL. DACT is used for off-premise signal
transmission for ULC.
When using these alarm communicators, the DACT shall be configured for
Contact ID.
Refer to the Alarm Communicator Installation Instruction for compatible
receivers.
Wiring between the DACT and the alarm communicator shall be within 20 feet,
and in conduit.
The C900V2 shall be installed in accordance with its installation instructions.
71
To Next Page
Loading...
Need help?
General
