Siemens FC901 - Accessories and Separate Parts

Accessories and separate parts
Accessory
items
Content Installation instruction Qty
1
2
3
4
5
6
7
8
9
10
11
S1
S2
1.1
1.2
2.2
2.1
2.3
3.1
3.2
3.3
4.1
4.2
5.1
5.2
Cable between batteries, refer to figure 1 1
Cable between batteries and main board, refer to figure 1,figure 2
1
Cable between City tie board and main board, refer to figure 2
1
Earth cable between enclosure and main board, refer to figure 1 and
figure 2
1
Grounding cable for front door and power supply,
refer to figure 1
2
Battery bracket left, refer to figure 1
1
Battery bracket right, refer to figure 1
1
Cable ties
10
No.8 screws, refer to figure 1
12
No.4 screws, refer to figure 2
2
Spacer for City tie board, refer to figure 2
2
Battery cell, refer to figure 1
2
Power supply, refer to power supply installation instruction sheet
delivered with power supply
1
Assembling notes
1. Mount the batteries with battery brackets.
2. Mount the power supply MOV, then mount the power supply to the enclosure.
3. Mount the City tie module onto the main board according to the Figure 2 (City tie module is optional).
4. Connect the cables to the corresponding position marked on the drawing
(The power supply input cable and output cable are not included in the FC901 and FC2005 package).
4. Tie the cables to the enclosure with cable tie, refer to the Figure 1(Cable tie features).
5. Mount the Main board assembly onto the Enclosure according to Figure 3.
6. Mount the Lock pin to the Front door axis(Both are included in the Enclosure package)
S3
Front door hinge axis lock pin, refer to Detail A
2
S4
Front door hinge axis, refer to Detail A
2
Document ID: A5Q00039713A
Page 1/12 02.2012
Fire Safety & Security Products
Building Technologies
FC2005/FC901 installation instruction
S5
2
EOL for NAC, refer to Detail C
Note: Item 3,6,7,11,S1and S2 are not delivered with the FC901 and FC2005.And should be ordered separately.
FC2005/FC901 installation instruction
12
Power supply MOV(Metal Oxide Varistor), refer to figure 2
1