Siemens FDCW221 - Installing the Radio Base SMF6120 and Manual Call Point SMF121

Mounting/Installation
Installing the
radio base SMF6120 and manual call point SMF121
5
53 |
82
Building Technologies
009865_m_en_
--
Fire Safety
2015-11-06
5.3 Installing the radio base SMF6120 and manual call
point SMF121
Installing the radio base SMF6120
w Ensure that the radio base SMF6120 is connected to the radio gateway
FDCW221 from its intended location.
l Secure the radio base at a height of 1.3…1.6 m on a level surface using
suitable screws. Use the mounting openings (1).
Note the word 'TOP' on the radio base housing.
Mounting openings in the radio base SMF6120
1 Mounting openings
1
1