Siemens FDCW221 - Resetting the DOW1171 to Delivery Status

Commissioning
Resetting the DOW1171 to delivery status
6
63 |
82
Building Technologies
009865_m_en_
--
Fire Safety
2015-11-06
6.7 Resetting the DOW1171 to delivery status
NOTICE
Resetting the radio smoke detector to delivery status
All existing configurations are deleted.
● Only reset the radio smoke detector to its delivery status if the existing
configurations can be deleted.
● Ensure that no gateway is in configuration mode during the reset process.
Exception: The reset radio device should be logged back on to the gateway
immediately.
Figure 4: Rear of radio smoke detector DOW1171
1 'New' log-on button 3 Battery clips
2 9 V lithium batteries
The 'New' log
-
on button (1) can be actuated using a size 0 screwdriver or similar
tool.
1
2
3