Maintenance
19
Building Technologies FL-III Maintenance and Repair
CPS Fire Safety 08.2012
Location of the assembly groups:
(For illustrative purposes, a sectional view of the housing cover is used.)
The following images show the the location of the mating adapter(s) and the fibre-
optical connector(s) of the controller.
Fig. 11 Mating adapter of the fibre-optical connectors (left), dummy connector
and internal fibre-optical connector (right)
Fig. 12 Removed exterior fibre-optical connector (left), removed internal fibre-
optical connector (right)
Fig. 13 Optical ports panel
a) Pull out the optical pots panel just like a drawer until the end stop
b) Pull the internal fibre-optical connector out of the mating adapter
To Next Page
Loading...
