Repairs
40
Building Technologies FL-III Maintenance and Repair
CPS Fire Safety 08.2012
Fig. 27 Laid down housing side wall with internal AC/DC voltage converter
Fig. 28 Removal of the internal AC/DC voltage converter from the housing side
wall (left) and from the intermediate panel (right)
Fig. 29 Assignment of the connectors of the internal AC/DC voltage converter
1 Release and remove the housing cover of the controller.
2 Remove the exterior screws of the housing side wall facing the power supply
(fig. 26) and lay down the housing side wall (fig. 27).
To Next Page
Loading...
