Repair Report
52
Building Technologies FL-III Maintenance and Repair
CPS Fire Safety 08.2012
OTS30xx Repair report
Date
Contractor performing the work
Service technician performing
the work
Client
Project name
Controller name
Controller serial number (S/N)
Controller model
Description of the issue:
Countermeasures implemented
(general description):
Replacement of memory card
Installation / replacement of riser card and interface panel
Installation / replacement of 24-way output card
Installation / replacement of 12-way input card / 12-way output card
Replacement of battery
Replacement of power supply
Performed work:
Replacement of internal AC/DC voltage converter
Result of the countermeasures
(general description):
Controller was opened: All
inputs and outputs were tested
with I/O Tester.
Test result OK Test result NOT OK
Event memory was checked for
the absence of errors, warnings
and other events.
Test result OK Test result NOT OK
General functional test of the
controller was performed in
accordance with the regular
maintenance schedule.
Test result OK Test result NOT OK
Commissioning of the controller
was performed in accordance
with the installation and
operating manual.
Test result OK Test result NOT OK
Documentation Yes, all required data was sent to the technical support department of
the manufacturer
In the case of the replacement
of the memory card
Yes, the old memory card was sent to the technical support department
of the manufacturer
To Next Page
Loading...
