Reprogram, activate and deactivate codes
M
M
Identifiers
1 = codes are active
2 = codes are not active; all operating
functions are freely accessible. The
codes are automatically reactivated if
a function is not selected within
15 minutes.
3 = codes are permanently inactive. They
are activated again by identifier 1.
4 = reprogram codes (see special sheet
in appendix).
Factory setting: 1
*** 50 Reprogram, activate/deactivate codes
Identifier
4
5
3
CL
0
2
1
Special operator
prompting
Identifier
Identifier
Identifier
A-34
To Next Page
Loading...
