Need help?Do you have a question about the Siemens MAG 1100 F and is the answer not in the manual?
General| Type | Electromagnetic Flow Meter |
|---|---|
| Measurement Principle | Electromagnetic |
| Process Pressure | Up to 40 bar |
| Output Signal | 4-20 mA, Pulse, Frequency |
| Lining Material | PTFE |
| Electrode Material | Stainless Steel, Hastelloy, Tantalum |
| Pressure Rating | PN 40 |
| Communication | HART, PROFIBUS PA |
| Power Supply | 24 V DC |
| Protection Degree/Class | IP67 |
| Material | Stainless Steel |
| Temperature Range (medium) | -40 to +180 °C (-40 to +356 °F) depending on lining |
| Accuracy | ±0.5% of reading |
Key safety points to read and understand before installation and use.
Purchaser responsibilities regarding material selection, installation stresses, and operating limits.
Technical specifications for MAG 1100 sensors, including HT and Ex versions.
Technical specifications for the MAG 1100 F sensor model.
Technical specifications for MAG 3100 series sensors, including HT and P variants.
Technical specifications for the MAG 5100 W sensor model.
Technical specifications for MAG 5000 and MAG 6000 transmitters.
Details flowmeter accuracy charts and reference conditions for performance.
General guidelines for optimal sensor installation to ensure accurate measurements.
Explains potential equalization methods for sensors to ensure electrical neutrality.
Wiring diagram for MAG 5000/6000 transmitters, showing power supply and connections.
Wiring diagrams for compact and remote installations, including cable considerations.
Configuration of basic parameters like frequency, flow direction, and units.
Configuration options for current, digital, pulse, and relay outputs.
Specific configuration for relay outputs, especially for cleaning unit operation.
Step-by-step guide for troubleshooting transmitter malfunctions.
Table listing symptoms, causes, and remedies for MAG transmitter issues.
Checklists for diagnosing MAG sensor issues, both installed and removed.
To Next Page