Need help?Do you have a question about the Siemens FIDAMAT 6 and is the answer not in the manual?
General| Protection Class | IP54 |
|---|---|
| Measuring Components | Hydrocarbons |
| Technology | Flame Ionization Detector (FID) |
| Applications | process control |
| Measurement Principle | Flame ionization |
| Measuring Range | 0 to 10, 000 ppm |
| Response Time | < 1 s (T90) |
| Operating Temperature | 5 to 45 °C |
| Power Supply | 100 ... 240 V AC, 50/60 Hz |
| Output Signal | 4 to 20 mA, RS485 |
Emphasizes observing manual instructions and device symbols for safe operation and maintaining device condition.
Covers critical warnings like danger of explosion from combustible gases and device modification risks.
Explains the FID measuring principle, ion formation, current conversion, and substance class specificity.
Highlights warnings related to sample gas contact, combustible gases, and improper installation procedures.
Covers crucial safety aspects like hazardous voltage, missing ground terminals, and handling toxic/flammable gases.
Covers safety warnings for commissioning, device position, operation, interfaces, and gas preparation.
Outlines procedures for commissioning, including warm-up phases, operating states, and state changes due to faults.
Explains setting measuring ranges, spans, zero points, calibration methods, and AUTOCAL functions.
Details the device's operating modes (Coded, Decoded, Operator control), operator keys, and input editing.
Covers general calibration information, zero point, span calibration, setpoints, and AUTOCAL functions.
Explains calibration submenu options including zero calibration, span calibration, and AUTOCAL.
Details configuration settings like analog output, relay assignments, binary inputs, ELAN, and PROFIBUS.
Covers critical safety warnings about dangerous voltage, gas lines under pressure, and faulty adjustments.
Covers design, enclosure, electrical characteristics, fuse values, and gas consumption data for FIDAMAT 6 analyzers.
Lists general specs, gas inlet conditions, time response, measuring characteristics, and electrical I/O for FIDAMAT 6-E.
Details general specifications, gas inlet conditions, and pressure/flow data for the FIDAMAT 6-G.
Lists device functions categorized by submenu, corresponding to software version V1.3.6.
To Next Page
