FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
9
Before beginning work with this device, please read this manual! It contains important
information and data that must be observed to ensure proper functioning of the device and to
save on service costs. The manual will help you to operate the device more easily and
efficiently, allowing you to achieve reliable results.
1.1 Device versions
The FIDAMAT 6 is designed for quantitative determination of hydrocarbons and is available
in various configurations.
This manual describes the following device versions:
FIDAMAT 6-E For sample gas with atmospheric pressure,
with heated pump and combustion air con-
7MB2421-xDA1x-xxAx
FIDAMAT 6-G For sample gas with overpressure, for ultra-
pure gas measurement, without pump
7MB2421-xBA1x-xxAx
Note
Differences between device versions
The two device versions FIDAMAT 6
-E and FIDAMAT 6-G are described individually if
differences exist. The name of the device version involved is indicated when describing
differences.
However, where features or procedures are described that apply to all versions of the
FIDAMAT 6 series, the standard name FIDAMAT 6 will be used or omitted altogether.
To Next Page
Loading...
Need help?
General
