Siemens FIDAMAT 6 - Analyzer Configuration (Function 1); Diagnostic Values (Function 2)

Functions
8.2 Analyzer status
FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
77
The analyzer status functions are freely accessible. For this reason, there is no code query
and no change of operating mode.
The analyzer status submenu offers you various functions for displaying device parameters
and stored data.
8.2.2 Analyzer configuration (function 1)
After this function is selected, the following device manufacturing data appear:
Motherboard
● Firmware number:
Article number of the motherboard software stored in the EPROM
● Article number:
Information on device ordering data
● Production number:
Date of manufacture and device serial number
● Object version:
Device hardware version
● Software version/date:
Version of motherboard software, date, version of boot software of motherboard
Adapter board
● Firmware number:
Article number of the adapter board software stored in the EPROM
● Software status:
Version of the adapter board software
● Boot software status:
Version of the adapter board boot software
8.2.3 Diagnostic values (function 2)
The most important diagnostic values may be called using function 2. They may allow
conclusions to be drawn for evaluation of errors or setting work.