Functions
8.6 Configuration
FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
105
Figure 8-39 Adjust external pressure
With function 62, you put the device into the "Measuring" operating state by activating the
sample gas, zero gas or calibration gas.
Also, you can test the pressures of these gases and adjust them if necessary.
8.6 Configuration
8.6.1 Configuration submenu
Figure 8-40 Configuration submenu
All functions of this menu are only accessible via the code of level 2.
This menu contains all functions required for configuring the device.
Press the fifth softkey ("...continue") to branch to further configuration functions.
To Next Page
Loading...
