Siemens OXYMAT 6 User Manual

ULTRAMAT 6, OXYMAT 6, CALOMAT 6, ULTRAMAT 23,
OXYMAT 61
Schnittstelle / Interface PROFIBUS DP / PA
Beschreibung / Description 02 / 2002
s
A5E00054148-03
Function Block
Digital Output
PROFIBUS – DP / PA
Physical Block
Device Management
Diagnosis
cyclic
acyclic
AUTOCAL
SIMATIC PDM
CFC-diagnosis-tool PCS 7
Start / Abort
AUTOCAL +Status
Function Block
Analog Input 1
Function Block
Analog Input 2
A
larm
Warning
Scale...
Function Block
Analog Input 3
Value 1 + Status
Value 2 + Status
Value 3 + Status
A
larm
Warning
Scale...
A
larm
Warning
Scale...
signal 1
Transducer
-Block
Sensor 1
signal 3
Transducer
-Block
Sensor 3
signal 2
Detekto
r
1
Detekto
r
2
Detekto
r
3
Transducer
-Block
Sensor 2
Function Block
Analog Input 4
Value 4 + Status
A
larm
Warning
Scale...
signal 4
Transducer
-Block
Sensor 4
Detekto
r
4

Siemens OXYMAT 6 Specifications

General

Brand	Siemens
Model	OXYMAT 6
Category	Measuring Instruments
Language	English

Summary

Schnittstelle / Interface PROFIBUS DP / PA

Information for the User

Safety Notes

Provides warnings and notes for safe operation and handling.

PROFIBUS Properties

Details PROFIBUS properties, including communication protocols.

Assembly Information

Bus Connection for ULTRAMAT / OXYMAT / CALOMAT 6 in Field Housing

Describes bus connection for specific device types in field housing.

Bus Connection for ULTRAMAT / OXYMAT / CALOMAT 6 Module and OXYMAT 61

Details bus connection for modules and OXYMAT 61.

Bus Connection for ULTRAMAT 23

Explains the bus connection for ULTRAMAT 23.

PROFIBUS-PA Bus Connectors

Information on PROFIBUS-PA connectors and pin assignments.

PROFIBUS-DP Bus Connectors

Information on PROFIBUS-DP connectors and suitable RS 485 connectors.

Pin Assignment on Binary and Relay Outputs

Pin assignment details for binary and relay outputs.

Optional Module Setup

Details the setup and connection of optional modules.

Installing the Optional Module (Retrofitting)

Instructions for installing optional modules, including firmware considerations.

Transmitting User Data via PROFIBUS

Profiles for ULTRAMAT, OXYMAT and CALOMAT

Describes block models and profiles for various gas analyzers.

Transducer Block with ULTRAMAT, OXYMAT and CALOMAT

Details parameters and functions of the transducer block for specific analyzers.

Analog Input Block with ULTRAMAT, OXYMAT and CALOMAT

Explains parameters for the analog input block, including limits and scaling.

Cyclical data transmission/measured value status

Discrete Output Block with ULTRAMAT, OXYMAT and CALOMAT

User Data Discrete Output Block with ULTRAMAT / OXYMAT / CALOMAT

Physical Block with ULTRAMAT, OXYMAT and CALOMAT

Commissioning

Selection of Devices with a Configuring Tool

Selection of the Nominal Configuration

PROFIBUS Address

Function Blocks

SIMATIC PDM Instrument Catalog

Starting SIMATIC PDM

Settings

Adapting to the Desired Process Variable

Warning and Alarm Limits

Failure Behavior

Operation

Setting the Station Address ULTRAMAT 6/OXYMAT 6/CALOMAT 6/ OXYMAT 61

Instructions for setting the station address for specific analyzer models.

Setting the Station Address ULTRAMAT 23

Instructions for setting the station address for ULTRAMAT 23.