Siemens OXYMAT 6 - Pin Assignment on Binary and Relay Outputs

ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
83
2.6 Pin Assignment on Binary and Relay Outputs
2.6.1 ULTRAMAT 6 E / OXYMAT 6 E / CALOMAT 6 E / OXYMAT 61 Pin Assignment
You will find a detailed description in the respective device manual (chapter 2).
DSUB 37F
Function in
device
PIN Function Comments
M 1GND
20
2 Relay 7 Contact loading:
21 max. 24 V / 1A, AC/DC
3
22 Relay 8
4 Relay is dead
23 for relay contact setting shown
5 Relay 9
24
5
25 Relay 10
7
26
8 Relay 11
27
9
28 Relay 12
10
29
11 Relay 13
30
12
31 Relay 14
13
32 Digital input 7...14 - N
14 Digital input 7 Potential-free
33 Digital input 8 - P via optocoupler
15 Digital input 9 - P
34 Digital input 10 - P "0" = O V ( 0...4,5V )
16 Digital input 11 - P "1" = 24 V ( 13...33V )
35 Digital input 12 - P
17 Digital input 13 - P
36 Digital input 14 - P
18 NC (not connected)
37 NC (not connected)
M 19 GND