Siemens OXYMAT 6 - Optional Module Setup; Installing the Optional Module (Retrofitting)

ULTRAMAT 6 / OXYMAT 6 / CALOMAT 6 / ULTRAMAT 23 / OXYMAT 61
Schnittstelle PROFIBUS DP / PA Interface
A5E00054148-03
86
2.7 Optional Module Setup
2.8 Installing the Optional Module (Retrofitting)
☛ Note
The firmware in the analyzer may need to be changed.
See
chapter 6.2 Firmware
☛ Note
With module devices only the A5E00034504 module can be installed for non-intrinsically safe
connection to PROFIBUS-PA and the A5E00019145 module for connection to the PROFIBUS-DP.
Flash
EEPROM
firmware
PROFIBUS-P
A
9-pin Sub-D socket
Binary inputs/relay outputs
37-pin Sub-D socket
A5E00019145
/
A5E00034504 /
A5E00015899 (Exi)
PROFIBUS-DP
9-pin Sub-D plug
26-pin ribbon cable connector to motherboard