To Next PageTo Next Page
Need help?Do you have a question about the Siemens OXYMAT 64 and is the answer not in the manual?
General| Measurement Principle | Paramagnetic |
|---|---|
| Measuring Range | 0 to 100% O2 |
| Smallest Measuring Span | 0 to 1% O2 |
| Linearity | < 1% of span |
| Sample Gas Temperature | 0 to 50 °C (32 to 122 °F) |
| Ambient Temperature | 0 to +50 °C |
| Power Supply | 100 to 240 V AC, 50/60 Hz |
| Output Signal | 4 to 20 mA |
| Communication Protocol | RS 485 |
| Weight | Approx. 6 kg |
| Operating Temperature | 0 to +50 °C |
| Accuracy | ±0.1% O2 |
Details the intended uses and key capabilities of the OXYMAT 64 gas analyzer.
Explains the electrochemical measurement principle based on the ZrO2 sensor technology.
Crucial safety warnings related to explosion hazards and potential burns during installation.
Essential safety warnings for commissioning, covering explosion, electrical, and toxic gas hazards.
Details steps for initial startup, including the warmup phase and achieving measuring accuracy.
Lists and describes various device functions like calibration, parameters, and configuration options.
General guidelines and warnings for performing maintenance procedures on the device.
Provides guidance on identifying and resolving alarms, maintenance requests, and fault messages.
