Description
2.6 Communication
OXYMAT 64
Operating Instructions, 06/2008, A5E00880383-03
19
2.6.3 SIPROM GA functions
SIPROM GA is a software tool especially for service and maintenance tasks. All analyzer
functions, whether as a single device or several linked together, can be remotely operated
and monitored this way.
Functions:
● Display and storage of all device data
● Remote operation of all device functions
● Parameter and configuration settings
● Comprehensive diagnostics information
● Remote calibration
● Online help
● Cyclic storage of measured values
● Status on hard disk and export to commercially available user programs
● Download of new software
● Drift values according to QAL 3, DIN EN 14181
Hardware requirements:
● PC/laptop Pentium 133 MHz, RAM 32 MB, CD-ROM drive
● Vacant disk capacity min. 10 MB
● VGA graphics card supported by Windows
● Printer supported by Windows
● Vacant COM port: RS 232 for direct coupling to ELAN RS 485 network
● For connection of the Ethernet/485 interface converter, a standard network of 10 Mbit or
100 Mbit (RJ 45 connection) with TCP/IP is necessary. In the case of an RS 485 network,
the distance must not be more than 500 m. If this is exceeded, a repeater must be used.
Software requirements:
● Windows 95
● Windows 98
● Windows NT 4.0
● Windows 2000
● Windows XP
Ordering information Order No.
SIPROM GA software, German/English selectable during
installation, consists of 1 CD with installation instructions,
software, product certificate and registration form
S79610-B4014-A1
To Next Page
Loading...
