Siemens OXYMAT 64 - 5.3 Menu Control

Operation
5.2 Measured value display
OXYMAT 64
Operating Instructions, 06/2008, A5E00880383-03
47
5.2 Measured value display
In the following, the displays below are referred to as the "Measured value display" which
appear in the display in the two operating states "Coded display mode" and "Decoded
display mode".
Note
Device operating state
In the "Measured value display", the current operating state of the device can be read in the
bottom line. The "Measured value display" is not an operating state and not an operating
mode, but is simply displayed. It must not be confused with the "Measure" operating state
(also "Measuring state") of the device!
CAL CTRL CODE
O
2
O.650
%
O,O 20,O
1
1
2
2
3
3
4
4
Figure 5-3 Measured value display