Siemens OXYMAT 64 - Electrical Safety; Toxic Gases; Danger of Burns

Commissioning
4.1 Safety information
OXYMAT 64
36 Operating Instructions, 06/2008, A5E00880383-03
4.1.3 Electrical safety
DANGER
Electrical safety
Certain parts of this device are under dangerous voltage. Before switching on the device,
the housing must be closed and grounded.
Failure to do so may result in death, personal injury and/or damage to property. Please also
observe the section "Electric connection".
4.1.4 Toxic gases
WARNING
Toxic gases
When measuring toxic gases, it could occur that sample gas accumulates in the analyzer
because of leaks in the gas path.
To prevent the danger of poisoning, the analyzer or the system must be purged with air.
The gas displaced by purging must be collected using appropriate equipment and routed
for environmentally-friendly disposal via an exhaust line.
4.1.5 Danger of burns
CAUTION
Danger of burns
Temperatures of up to 300 °C can occur in the analyzer when switched on.
The plant owner is finally responsible for switching-on.