Operation
5.4 Operating functions
OXYMAT 64
52 Operating Instructions, 06/2008, A5E00880383-03
See also
Fast function selection (Page 50)
5.4.2 Analyzer status
5.4.2.1 Analyzer status submenu
Analyzer status O
2
1 Analyzer configuration
2 Diagnostic values
3 Logbook
4 Display meas. ranges
Figure 5-7 Analyzer status submenu
The analyzer status functions are freely accessible. For this reason, there is no code query
and no change in the operating mode.
The analyzer status submenu offers you various functions for displaying device parameters
and stored data.
5.4.2.2 Analyzer configuration (function 1)
After this function is selected, the following device manufacturing data appear:
Motherboard:
● Firmware No.:
Order No. of the software in the EPROM for the motherboard
● Order No.:
Information on device ordering data
● Production No.:
Indication of date of manufacture and device serial number
● Object version:
Indication of the hardware design of the device
● Software version/date:
Version of the motherboard software; date, version of boot software of motherboard
To Next Page
Loading...
