Siemens OXYMAT 61 User Manual

© Siemens AG 2018. All rights reserved
A5E45779144002-01, 09/2018
1
Continuous gas analysis
19" rack units of Series 6 and ULTRAMAT 23
Compact Operating Instructions in accordance with EN
61010-1 and EN 60079-0
Compact Operating Instructions
1
Introduction
1.1
Purpose of this documentation
These instructions are a brief summary of important features, functions and safety information, and contain all necessary
information required for safe use of the respective devices. Read the manual carefully prior to assembly and startup! To
ensure correct handling, become acquainted with the principle of operation of the respective device.
The instructions are aimed at persons who mechanically assemble the devices, connect them electrically, and commission
them.
To achieve optimum usage of the respective device read the detailed version of the respective operating instructions.
1.2
Product versions
These instructions are valid for the 19" rack units of Series 6 and the ULTRAMAT 23 gas analyzers which are available as
19" rack unit as well as bench-top unit. This includes the devices listed below:
● ULTRAMAT 23
● ULTRAMAT 6E
● ULTRAMAT/OXYMAT 6E
● OXYMAT 6E
● OXYMAT 61
● OXYMAT 64
● CALOMAT 6E
● CALOMAT 62E
● FIDAMAT 6
These gas analyzers are suitable for a wide variety of measurements and are also available in different versions. The data
on the label, among others, indicates which device version you have.

Siemens OXYMAT 61 Specifications

General

Response Time T90	< 10 s
Power Supply	24 V DC
Display	LCD
Housing Material	Aluminum
Measuring Range	0 to 100% O2
Operating Temperature	5 to 45 °C
Output Signal	4 to 20 mA
Sample Gas Temperature	0 to 50 °C
Ambient Temperature	5 to 45 °C
Measurement Principle	Paramagnetic alternating pressure method

Summary

1 Introduction

1.1 Purpose of this Documentation

Explains the goal and target audience of the operating instructions.

1.2 Product Versions

Lists the different product models covered by these instructions.

1.3 General Information

1.4 Special Information and Warnings

1.5 Proper Use

1.6 Qualified Personnel

1.7 Warranty Notes

1.8 Delivery Information

1.9 Standards and Regulations

1.10 Conformity with European Directives

2 Safety Instructions

Industrial Security

Discusses industrial security measures and recommendations for the device.

2.1 Prerequisites for Safe Use

Outlines conditions and precautions necessary for safe operation.

Specific Safety Hazards

Device Modification and Manipulation Hazards

Covers risks from unauthorized modifications and device manipulation.

Gas and Condensate Hazards

Details hazards related to harmful gases and condensate.

2.2 Analyzers in Hazardous Areas

CALOMAT 6E

Specific safety instructions for CALOMAT 6E in hazardous areas.

ULTRAMAT 23

Specific safety instructions for ULTRAMAT 23 in hazardous areas.

2.3 Analyzers in Biogas Plants

3 Assembly/Installation

3.1 Safety Information

General safety precautions related to assembly and installation.

3.2 Installation Location Requirements

FM and CSA Requirements

4 Connecting

4.1 Safety Instructions

General safety guidelines for connecting the device.

Hazardous Contact Voltage

Warns about electric shock risk from incorrect connections.

Missing PE/Ground Connection

Warns about electric shock risk due to missing ground connection.

4.1.2 Analyzers in Hazardous Areas

Safety requirements for analyzers in hazardous areas during connection.

4.2 Electrical Connection

4.2.1 Power Connection

Instructions and precautions for connecting the power supply.

4.2.2 Analyzers in Hazardous Area

Specific requirements for electrical connection in hazardous areas.

4.2.3 Connection of Signal Lines

Instructions for connecting signal lines and related safety notes.

4.2.4 PROFIBUS DP Connection

Details the PROFIBUS DP connector and connection precautions.

4.2.5 Pin Assignments

Details the pin assignments for various device components and connectors.

ULTRAMAT 23 Pin Assignments

Lists pin assignments for ULTRAMAT 23 motherboard and optional board.

CALOMAT 6E Pin Assignments

Lists pin assignments for CALOMAT 6E motherboard.

CALOMAT 6E AUTOCAL Board Connections

Details connections for the AUTOCAL module of CALOMAT 6E.

4.3 Gas Connections

4.3.1 Gas Preparation

Outlines recommended configuration for sample gas preparation.

4.3.2 FIDAMAT 6 Gas Connection

Specifies supply gases required for FIDAMAT 6 operation.

5 Commissioning

5.1 Safety Instructions

Safety precautions to be taken during commissioning.

5.2 General Information on Commissioning

5.3 Checking for Leaks

6 Service and Maintenance

6.1 Safety Instructions

General safety guidelines for service and maintenance.

6.1.1 General Safety Instructions

Covers hazards like media, voltage, and ESD during maintenance.

6.1.2 Analyzers in Hazardous Areas

Safety considerations for analyzers in hazardous areas during maintenance.

Specific Maintenance Hazards

Covers hazards like hot surfaces, chemical burns, and electrostatic discharge.

6.2 Replacing Fuses

7 Technical Specifications

7.1 General Technical Data

Provides general technical specifications for the analyzers.

7.2 Technical Specifications ULTRAMAT 23

Lists detailed technical specifications for the ULTRAMAT 23 model.

7.3 Technical Specifications ULTRAMAT 6E

Lists technical specifications for ULTRAMAT 6E and related models.

7.4 Technical Specifications OXYMAT 6E

Lists technical specifications for OXYMAT 6E and related models.

7.5 Technical Specifications OXYMAT 64

Lists detailed technical specifications for the OXYMAT 64 model.

7.6 Technical Specifications CALOMAT 6E

Lists detailed technical specifications for the CALOMAT 6E model.

7.7 Technical Specifications CALOMAT 62E

Lists detailed technical specifications for the CALOMAT 62E model.

7.8 Technical Specifications FIDAMAT 6

Lists detailed technical specifications for the FIDAMAT 6 model.

8 Taking Out of Operation and Disposal

8.1 Repair or Changing of Location

Procedures for shutting down the analyzer for repair or relocation.

8.2 Product Disposal

Guidelines for the correct disposal of the analyzer as electronic waste.

A Appendix

A.1 Service and Support

Information on obtaining technical support and finding regional representatives.

A.2 ESD Directives

Directives and measures for protecting against electrostatic discharge.

A.3 List of Abbreviations