Siemens 6 Series User Manual

© Siemens AG 2018. All rights reserved
A5E45779144002-01, 09/2018
1
Continuous gas analysis
19" rack units of Series 6 and ULTRAMAT 23
Compact Operating Instructions in accordance with EN
61010-1 and EN 60079-0
Compact Operating Instructions
1
Introduction
1.1
Purpose of this documentation
These instructions are a brief summary of important features, functions and safety information, and contain all necessary
information required for safe use of the respective devices. Read the manual carefully prior to assembly and startup! To
ensure correct handling, become acquainted with the principle of operation of the respective device.
The instructions are aimed at persons who mechanically assemble the devices, connect them electrically, and commission
them.
To achieve optimum usage of the respective device read the detailed version of the respective operating instructions.
1.2
Product versions
These instructions are valid for the 19" rack units of Series 6 and the ULTRAMAT 23 gas analyzers which are available as
19" rack unit as well as bench-top unit. This includes the devices listed below:
● ULTRAMAT 23
● ULTRAMAT 6E
● ULTRAMAT/OXYMAT 6E
● OXYMAT 6E
● OXYMAT 61
● OXYMAT 64
● CALOMAT 6E
● CALOMAT 62E
● FIDAMAT 6
These gas analyzers are suitable for a wide variety of measurements and are also available in different versions. The data
on the label, among others, indicates which device version you have.

Siemens 6 Series Specifications

General

Category	Measuring Instruments
Manufacturer	Siemens
Series	6 Series
Process temperature	Depends on model
Process pressure	Depends on model
Accuracy	Depends on model
Output	4 to 20 mA
Communication	HART
Power supply	24 V DC
Enclosure rating	IP67
Material	Stainless steel, Plastic
Resolution	Depends on model
Display	LCD
Operating Temperature	-20°C to +60°C
Storage Temperature	-40°C
Dimensions	Depends on model
Weight	Varies depending on model

Summary

1.3 General Information and Personnel

1.6 Qualified Personnel

Defines the qualifications required for personnel handling the device.

2 Safety Instructions

2.1 Prerequisites for safe use

Essential conditions for safe operation and handling of the device.

2.2 Analyzers in Hazardous Areas

2.2.1 CALOMAT 6E

Specific safety information for the CALOMAT 6E in hazardous areas.

2.2.2 ULTRAMAT 23

Specific safety information for the ULTRAMAT 23 in hazardous areas.

2.3 Analyzers in Biogas Plants

2.3 Analyzers in biogas plants

Safety considerations for analyzers used in biogas plants, focusing on H2S and methane.

3 Assembly/Installation

3.1 Safety information

General safety instructions for assembly and installation.

3.2 Installation Location Requirements

3.2 Installation location requirements

Guidelines for selecting an appropriate installation location for the device.

FM and CSA Guidelines

FM and CSA

4 Connecting

4.1 Safety Instructions

General safety rules and specific precautions for connecting the device.

4.2 Electrical and Signal Connections

Covers power, signal lines, PROFIBUS DP, and pin assignments.

4.3 Gas Connections

5 Commissioning

5.1 Safety Instructions

5.2 General Information on Commissioning

5.3 Checking for Leaks

6 Service and Maintenance

6.1 Safety Instructions

General safety instructions for service and maintenance activities.

6.1.1 General Safety Instructions

Precautions for handling hot/toxic media and electrostatic discharge.

6.1.2 Analyzers in Hazardous Areas

Safety instructions for maintenance of analyzers in hazardous areas.

6.2 Replacing Fuses