Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
A5E45779144002-01, 09/2018
35
Technical support is available on the Internet at: Services & Support (https://support.industry.siemens.com/cs/gb/en/sc)
Your regional Siemens representative can be found here: Contact partner (https://w3.siemens.com/aspa_app/)
Electrostatic sensitive devices can be destroyed by voltages which are far below the human perception limit. These
voltages already occur if you touch a component or the electric connections of a module without being electrostatically
discharged. The damaged caused on a modu
le by an overvoltage is not usually recognized immediately, but only becomes
evident after a longer period of operation.
Fundamental measures to protect against static discharge
● Provide good grounding:
When handling electrostatic sensitive devices, provide good grounding for persons, workstation and packaging. In this
manner you avoid static discharge.
● Avoid direct touching:
Only touch electrostatic sensitive devices when this is absolutely unavoidable (e.g. during maintenance). Hold the
modules so that you touch neither pins nor printed conductors. In this manner, the discharge energy cannot reach or
damage sensitive devices.
If you have to carry out measurements on a module, discharge yourself before carrying out any actions. To do this, touch
grounded metal objects. Only use grounded measuring instruments.
To Next Page
Loading...
Need help?
General
