Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
2 A5E45779144002-01, 09/2018
We are using the label of an ULTRAMAT 23 as an example.
Disposal information: Do not dispose with household waste!
Name and address of manufacturer
Order No. (MLFB number) of the device
Figure 1-1 ULTRAMAT 23 label (example)
These Operating Instructions also cover the rack-mounted versions of Series 6 (CALOMAT 6E and ULTRAMAT 23)
approved for operation in hazardous areas in accordance with the EU directive 2014/34/EU (ATEX).
The following table provides an overview of the associated analyzers.
Table 1-1 Rack-mounted analyzers of Series 6 approved for operation in hazardous areas
KEMA 09 ATEX 0027 X
II 3G Ex ec ic nC IIC T4 Gc
ULTRAMAT 23
7MB233x-xxxxx-xxxx-Z-E20+xxx
TÜV 02 ATEX 1873 X
Hermetic seal
or
II 2/3 G Ex ec nC IIC T4 Gb/Gc
CALOMAT 6E 7MB252x-xxx00-xABx-Z+xxx
7MB252x-xxx01-xABx-Z+xxx
It is essential that you also observe the respective "Special conditions" of the certificates referred to in the table.
These describe
● The fields of application
● The requirements for operation in hazardous areas
● Other precautionary measures which are important for operation.
The technical specifications in these Operating Instructions may be different to those in the associated Operating
Instructions for the analyzers and additional equipment under some circumstances. The technical specifications listed in
these Operating Instructions are valid in such cases.
To Next Page
Loading...
Need help?
General
