Installing
4.2 Mounting instructions
FIDAMAT 6
38 Operating Instructions, 01/2019, A5E00222135-04
Device damage
The device can overheat or materials become brittle through the influence of UV radiation.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. For
more information on this, see section "Technical specifications (Page 167)".
4.2 Mounting instructions
Note
Layout of the installation location
The installation location should be:
Easily accessible
Shock-free and vibration-free
Within the ambient temperature limits
Note
Weatherproof installation
Install the device at a location where it is protected against:
Direct heat and solar radiation
Mechanical damage
Vibrations
Contamination
Intrusion of dust
Corrosive media
Moisture
Significant and rapid temperature fluctuations
Strong air flow
To Next Page
Loading...
