108
Making VoIP settings Changing settings without the connection assistant
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 16.8.07
Version 2.1, 08.01.2007
Automatic update for the VoIP provider settings
After the first download of the VoIP provider settings, your phone will check daily whether
a newer version of the file for your VoIP provider is available via the Internet on the Siemens
configuration server. If this is the case, when the handset is in idle status the message New
profile available will be displayed, and the message key f flashes.
f Press the message key.
§Yes§ Press the display key to confirm the prompt.
~ Enter the system PIN and press §OK§.
The new data for your VoIP provider will be downloaded and saved on the phone.
Entering/changing VoIP user data
The VoIP settings must also be extended for your personal data. You will receive all neces-
sary data from your VoIP provider.
v
¢ Ð Settings ¢ Telephony ¢ VoIP (Enter system PIN) ¢ Provider Registr.
¤ Change multiple line input:
Username:
Enter the user name (caller ID) for your VoIP provider account. Username is often identi-
cal to your Internet telephone number (the first part of your SIP address, see page 123).
Authent. Name: / Authent. Password:
Enter the provider-dependent access data that has to be transferred by the phone to the
SIP service at registration.
¤ Click §Save§ to save the settings.
Please note:
– If you reply to the prompt with §No§, the display will not be repeated. The message New profile avail-
able will only be shown again if a newer version of the VoIP settings than the one rejected is avail-
able.
– You can deactivate the automatic version check via the Web configurator (page 143).
Please note:
When making these entries, please remember the VoIP user data is case sensitive. To enter text see
page 160.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
