EasyManua.ls Logo

Siemens GIGASET C470 IP - Resetting Fast Access for the Answer Machine Using Key 1; Operating When on the Move (Remote Operation)

Siemens GIGASET C470 IP
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
Resetting fast access for the answer machine using key 1 Operating the base station answer
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.8.07
Version 2.1, 08.01.2007
Changing the language for voice prompt and pre-recorded announcement
vN5O2
Enter digits and press
§OK§ To set Czech (short).
2 §OK§ To set Slovene (short).
3
§OK§ To set Croatian (short).
4 §OK§ To set English (short).
Resetting fast access for the answer machine using key 1
The integrated answer machine has already been preset for fast access at the factory. How-
ever, if you have set the network mailbox for fast access (page 86), you can reset this set-
ting.
v
¢ Ð Settings ¢ Voice Mail ¢ Set Key 1
Answer Machine
Select and press
§OK§.
a Press and hold (idle status).
The setting for fast access applies to all registered handsets. At least one of the handset's
send/receive numbers must match a receive number of the answer machine to enable
access to the answer machine via fast access.
Operating when on the move (remote operation)
You can check and activate your answer machine from any other telephone (hotel, pay
phone etc.), or initiate ringback from the answer machine with an SMS.
Preconditions:
u You have set a system PIN other than 0000 (page 103).
u The phone you are using for remote operation has touch tone dialling (DTMF), i.e. you
hear different tones when you press the keys. Alternatively, you can use a code trans-
mitter (available from your mobile phone retailer).
Calling the answer machine and playing back messages
Precondition: Your answer machine is activated.
~ Dial your own number that is assigned to the answer machine as a receive
number.
9~ When you hear your announcement, press 9 and enter the system PIN.
Please note:
Remote operation via VoIP connections is possible as long as DTMF signals are transmitted (depend-
ing on the provider) as SIP info messages, audible signals in the voice channel (inband or audio) or
as special RTP data packets (pursuant to RFC2833).
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table of Contents

Other manuals for Siemens GIGASET C470 IP

Related product manuals