72
Operating the base station answer machine Operating when on the move (remote operation)
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.8.07
Version 2.1, 08.01.2007
You will be informed whether any new messages have been recorded. The messages are
now played back. All messages are played back irrespective of their receive number. After
the new messages, the old messages are played back. Finally, the remaining memory time
is given.
You can control message playback by means of the keypad.
Operating the answer machine via the keypad
The following keys are used for operation:
A Previous:
Go to the start of the current message. Press repeatedly to go to the previous
messages.
B Stop/resume:
Stop playback: Press again to resume.
If there is a pause lasting longer than one minute, the connection to the answer
machine is terminated.
3 Next:
Skip to next message. Press several times to go to the following messages.
: New:
Mark current message as "new". Start playback of the following message.
0 Delete:
Delete current message.
Cancelling remote operation
¤ Press the end call key or replace the receiver.
Activating the answer machine
¤ Phone home and allow to ring for around a minute. Use a phone number that has been
assigned to the answer machine as a receive number.
You hear: "Please enter PIN".
~
Enter system PIN.
Your answer machine will be activated in the set mode (page 65). It tells you how much
memory time is left.
The messages are now played back.
The answer machine cannot be deactivated remotely.
Please note:
The answer machine will terminate the connection under the following circumstances:
– an incorrect system PIN has been entered.
– there are no messages in the answer machine
– after the remaining memory announcement
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
