144
Web configurator Activating VoIP status message display
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 16.8.07
Version 2.1, 08.01.2007
Activating VoIP status message display
Display VoIP status messages on your handset when there are VoIP connection problems.
These messages give you information on the status of a connection and contain a provider-
specific status code that helps the service team when they are analysing the problem.
¤ Open the following Web page: Settings ¢ Miscellaneous.
¤ Click Yes next to Show VoIP status on handset to activate the status message display.
If you click No, no VoIP status messages are displayed.
¤ Click Set to save the changes.
Copy date and time from time server
The date and time are shown in the idle display of registered handsets. They are important,
for example, for stating the correct time in the calls list and for the "alarm clock" function.
There are two methods for updating the time and date on your base station: manually with
one of the registered handsets (page 12) or automatically by synchronisation with a time
server on the Internet.
Activate/deactivate synchronisation with a time server as follows:
¤ Open the following Web page: Settings ¢ Miscellaneous.
¤ In the Automatic adjustment of System Time with Time Server field select Yes to activate syn-
chronisation between base station and a time server. If you select No the base station
will not adopt time settings from a time server. In this case you should set the time and
date manually using a handset.
¤ The Last synchronisation with time server field shows the last time when the base station
compared time and date settings with a time server.
¤ In the Time Server field, enter the Internet address or name of the time server from which
the base station should adopt its time and date settings. The time server
"europe.pool.ntp.org" is set as default on the base station. You can overwrite the set-
ting.
¤ From the Country list, select the country in which your base station is being operated.
¤ The Time Zone field shows the valid time zone for the Country. It shows the deviation
between local time (not summer time) and Greenwich Mean Time (GMT).
If a country is divided into various time zones, they will all appear in the list. Select the
appropriate Time Zone for the base station from the list.
¤ The Automatically adjust clock to summer-time changes field will be displayed if your time
zone differentiates between summer time and winter time.
Activate On if you want the time to change automatically to summer time or winter time
when summer time begins and ends respectively.
Activate Off if you do not want to change to summer time.
Please note: If the date and time are updated by a time server that automatically
switches between summer time and standard time, you must always activate Off here.
Please note:
A table with possible status codes and their meaning can be found in the appendix on page 150.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
