42
Network services – VoIP Functions during a call
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / netservices_SAG.fm / 16.8.07
Version 2.1, 08.01.2007
Functions during a call
Precondition: Your phone will permit two parallel VoIP connections (s. Allow 1 VoIP call only
on page 128).
Consultation call
During a call:
§Ext.Call§ Press the display key.
~c Enter the number or copy from the directory and press and release/press and
hold c.
The number must be dialled via VoIP.
.
If the participant answers, you have the following options:
u Toggling:
¤ Use q to toggle between the participants.
¤ End call with active participant: §Options§ End Active Call.
u Conference call:
¤ Call both participants: press the display key §Conf.§.
¤ End the conference call (toggling): press display key §EndConf§.
¤ End call with both participants: press the end call key a.
u Forwarding (provider dependent):
Precondition: You are toggling calls and you phoned the currently active participant
yourself.
¤ To connect the two external participants: §Options§ Call Transfer
If call forwarding was successful, a message will appear to this effect. The handset will
then switch to idle.
Accepting a waiting call
Precondition: Call waiting is activated (page 41).
§Accept§ Press the display key.
You have the option of toggling or holding a conference call.
Please note:
After a few seconds, the number selected for a consultation call is saved in the last number redial list.
Please note:
– If the first call was an internal call, the internal connection is ended.
– An internal call waiting is shown on the display. You can neither accept the internal call nor reject
it.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299