87
Network mailbox message Using the network mailbox
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 16.8.07
Version 2.1, 08.01.2007
Configuring the network mailbox for fast access and entering the network mailbox number
v ¢ Ð Settings ¢ Voice Mail ¢ Set Key 1
Network Mailb.
Select and press
§OK§ (=on).
~ Enter the number for the network mailbox. Add a line suffix if necessary
(e.g. #0 for the fixed line network).
§Save§ Press the display key.
a Press and hold (idle status).
Fast access is automatically activated.
The setting for fast access applies to all Gigaset C47H handsets.
Calling the network mailbox
Press and hold. You are connected straight to the network mailbox.
d If necessary, press the handsfree key. You hear the network mailbox announce-
ment.
Network mailbox message
The way in which you are informed of new messages in the network mailbox depends on
the relevant fixed line network or VoIP provider.
See user guide for each network mailbox.
Please note:
– If no number has been entered: press and hold to enter the number.
– To deactivate fast access, you must delete the number.
Please note:
If you have set an automatic area code (page 134), the area code is also prefixed to the number of
the network mailbox if it does not start with 0 and is dialled via VoIP.
If the number does not begin with 0, please ask your VoIP provider. A network mailbox can frequently
be accessed via an alternative phone number (with area code) too.
‰
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
