26
Making calls with VoIP and the fixed line network Making an external call
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / telephony.fm / 16.8.07
Version 2.1, 08.01.2007
Making calls with VoIP and the fixed line network
Making an external call
External calls are calls made via the public telephone network (fixed line network) or via
the Internet (VoIP). You generally decide which connection type you want to use for a spe-
cific call when you dial the number.
Use the talk key to select the type of connection and make the call
By briefly pressing or pressing and holding the call key c, you can determine the type of
connection for the call you want to make (fixed line network or VoIP).
Precondition: You enter the number without a line suffix (page 27) and have not defined
any dialling plans for this number.
~c Enter number (without suffix) and briefly press/press and hold the talk key.
A default connection is established on your phone (fixed line network or VoIP, page 105).
¤ Briefly press the talk key c if you want to make a call via this default connection.
¤ Press and hold the talk key c if you want to make the call via the other connection
type.
If you have assigned a number of VoIP numbers to your phone, you can define which VoIP
number (VoIP account) is used for external calls from each specific handset (handset send
number, page 130).
Please note:
– You can conduct up to three separate external calls via your base station (using different hand-
sets): two calls via VoIP and one via the fixed line network.
– You can define dialling plans for certain numbers or area codes by determining the connection
and therefore the billing method to be used (cost control, see page 135) when these numbers are
dialled.
– Dialling with the directory (page 43), quick dial keys (page 97) or last number redial list (page 47)
saves repeated keying of phone numbers. You can modify or add to these numbers on a call-to-
call basis.
– If you use VoIP to make a call to the fixed line network, you may also have to dial the area code for
local calls (depending on the VoIP provider). You can avoid having to dial your own area code by
entering it into the configuration (page 134). Your area code is then added automatically when
you make local calls.
Please note:
If you are using a GAP compatible handset other than the Gigaset handsets C47H, S67H, S68H,
SL37H, S45 and C45, every call will be made via the standard connection, even if you press and hold
the call key. If you want to use the non-default connection to make a call, enter a star (*) at the end
of the number.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
