17
Making settings for VoIP telephony First steps
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.8.07
Version 2.1, 08.01.2007
As soon as the handset battery is sufficiently charged, the message key f on the handset
will flash (approx. 20 minutes after you have put the handset in the charging cradle). Press
the message key f to start the connection assistant.
You will see the following display:
§Yes§ Press the display key to start the connection assistant.
~ Enter the system PIN (default is 0000) and press §OK§.
If you press §No§, the procedure that follows is described under "Entering your name in the
Gigaset.net directory" on page 18.
Downloading VoIP provider data
The phone establishes a connection with the Siemens server on the Internet. Various pro-
files with general access data for different VoIP providers can be downloaded here.
After a brief period you will see the following display:
q Select country (press up/down on the control key) and press
§OK§. VoIP providers
for which VoIP profiles are available will be displayed.
q Select your VoIP provider and press
§OK§.
Please note:
Your phone is preconfigured for dynamic assignment of the IP address. In order for your router to "rec-
ognise" the phone, dynamic IP address assignment must also be activated on the router, i.e. the
router's DHCP server is activated. Turn to page 109 to find out how to assign your phone a static IP
address if necessary.
Please note:
The connection assistant will also start automatically if you try to establish a connection via the Inter-
net before you have made the necessary settings.
You can also call up the connection assistant at any time via the menu (page 107).
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes
Select Country
Germany
England
France
Netherlands, the
Ý OK
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299