EasyManua.ls Logo

Siemens GIGASET C470 IP - Page 21

Siemens GIGASET C470 IP
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
First steps Making settings for VoIP telephony
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.8.07
Version 2.1, 08.01.2007
Server not accessible!
The phone has no connection to the Internet.
¤ Check the cable connection between the base station and the router (the LED on the
base station must light up) and the connection between the router and the Internet con-
nection.
¤ Check whether the phone is connected to the LAN.
It may not have been possible to dynamically assign an IP address to the phone
or
You have assigned a static IP address to the phone that has either already been
assigned to another LAN subscriber or does not belong to the router's address block.
¤ Press the paging key on the base station. The IP address appears on the handset dis-
play.
¤ Press the talk key on the handset to end paging call.
¤ Start the Web configurator with the IP address.
¤ If no connection can be established, change the settings on the router (activate DHCP
server) or the phone's IP address.
Provider registration failed!
u Your personal data for registering with the VoIP provider may have been entered incom-
pletely or incorrectly.
¤ Check your entries for Username, Authent. Name and Authent. Password. In particular,
check your use of upper and lower case.
To do this, open the following menu on your handset:
v
¢ Ð Settings ¢ Telephony ¢ VoIP (Enter system PIN) ¢ Provider Registr.
(see page 108)
u The server address for the VoIP server has not yet been entered, or has been entered
incorrectly.
¤ Start the Web configurator.
¤ Open the following Web page: Settings ¢ Telephony ¢ Connections.
¤ Click the Edit button next to the first VoIP connection.
¤ Edit the server address where necessary.
Please note:
If port forwarding is activated on your router for the ports that have been registered as the SIP port
(Standard 5060) and the RTP port (Standard 5004), it is advisable to deactivate DHCP and assign the
phone a static IP address (otherwise you may not be able to hear the other party during VoIP calls):
Assign IP address via the handset menu:
v
£ Ð Settings £ Base £ Local Network
Or
Assign IP address via the Web configurator:
¥ Open the following Web page: Settings £ IP Configuration.
¥ Select IP address type.
Please note that the IP address and subnet mask depend on the router's address block.
You must also enter the standard gateway and DNS server. The IP address for the router is generally
entered here.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table of Contents

Other manuals for Siemens GIGASET C470 IP

Related product manuals