13
First steps
Gigaset C590/C595 / IM EN / A31008-M2101-R101-2-UZ19 / starting.fm / 22.06.2010
Version 4, 16.09.2005
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤ To remove – using your right
thumb apply pressure to the cen-
tre of the belt clip, push the fin-
gernail of your left index finger
between the clip and the casing
and lift the clip upwards.
Placing the handset in the base/charging cradle
¤ Place the handset in the base/charging cradle with its display facing forward.
Each handset is registered with the base at the factory. You do not need to com-
plete a registration. If you wish to use your handset with a different base or use fur-
ther handsets with your base, you will have to register the handset manually
¢ page 56.
To charge the batteries, leave the handset in the base/charging cradle.
Please note
Only place the handset in the base/charging cradle that is intended for it.
To Next Page
Loading...
