Siemens Gigaset C595 - SMS on a PABX; Activating;deactivating first ringtone muting; Activating;deactivating SMS function

46
SMS (text messages)
Gigaset C590/C595 / IM EN / A31008-M2101-R101-2-UZ19 / sms_BRD_neutral.fm / 22.06.2010
Version 4, 16.09.2005
SMS on a PABX
u You can only receive an SMS when
the Calling Line Identification is for-
warded to the extension of the PABX
(CLIP). The CLIP evaluation of the SMS
centre number is completed in your
Gigaset.
u Depending on your PABX, you may have
to add the access code (external line pre-
fix) before the number of the SMS centre.
If in doubt, test your PABX, e.g. by send-
ing an SMS to your own number: once
with and once without the access code.
u When you send SMS messages, your
sender number may be sent without your
extension number. In this case the recipi-
ent cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
Activating/deactivating first
ringtone muting
v Open the main menu.
*#Q5#  O
Press keys.
Q
§OK§ Make the first ring audible.
Or:
 §OK§ Mute the first ring.
Activating/deactivating SMS
function
If you deactivate the SMS function, you can-
not send or receive any SMS messages with
your phone.
The settings you have selected for sending
and receiving SMS messages (e.g. the num-
bers of the SMS centres) and the entries in
the incoming and draft SMS lists are saved
even after you turn off your phone.
v Open the main menu.
*#Q5# 2L
Enter the digits.
Q
§OK§ Deactivate the SMS function.
Or:
 §OK§ Activate the SMS function
(default setting).