Siemens Gigaset C595 - Handset Settings; Quick Access to Numbers and Functions; Assigning Digit Keys

61
Handset settings
Gigaset C590/C595 / IM EN / A31008-M2101-R101-2-UZ19 / registr_sett.fm / 22.06.2010
Version 4, 16.09.2005
When the room monitor function is acti-
vated, the idle display looks as shown below:
Changing the set destination
number
v ¢ É ¢ Room Monitor
¤ Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
(
¢ page 60).
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In the idle status press the display key
§OFF§
to deactivate the room monitor mode.
Deactivating the room monitor
remotely
Preconditions: The phone must support
tone dialling and the room monitor should
be set for an external destination number.
¤ Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room monitor
settings (e.g. no ringtone) on the handset
will remain activated until you press the dis-
play key
§OFF§ on the handset.
To reactivate the room function with the
same phone number:
¤ Turn on the activation again and save
with
§Save§ (¢ page 60).
Handset settings
Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.
Quick access to numbers and
functions
You can assign a number from the directory
to each of the digit keys Q and 2to
O.
The left and right display keys have a func-
tion pre-selected by default. You can change
the assignment (
¢ page 62).
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys
Precondition: You have not yet assigned a
number to the digit key.
¤ Press and hold the digit key.
or
Press the digit key briefly and press the
§QuickDial§ display key.
The directory is opened.
¤ Select an entry and press §OK§.
The entry is saved on the appropriate digit
key.
i à V
07:15
INT 1 22 Oct
Á
Room Monitor
0891234567
OFF Options
Please note
If you delete or edit the entry in the
directory at a later date, this will not
affect the assignment to the number key.