69
Using multiple handsets
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Register-HS.fm / 08.12.2011
Version 4.1, 21.11.2007
Registering other handsets to the Gigaset SL910/SL910A base
You can register other Gigaset handsets and handsets for other devices with GAP
functionality as follows.
Assigning the internal number
The base assigns the handset the lowest free internal number (possible numbers:
1–6). The internal name of the handset is displayed in idle status, e.g., INT 2. This
means that internal number 2 has been assigned to the handset.
De-registering handsets
¤ In the Settings menu (¢ page 25), touch [ É Handsets and Base].
Proceed in accordance with one of the following two scenarios:
u You want to de-register the handset currently being used:
¤ Touch De-register. ¤ If necessary, enter the system PIN. ¤ Confirm PIN
with è.
¤ Handset de-registration is confirmed with Ye s .
If the handset is still registered to other bases, it switches to the base with the
best reception (Best Base;
¢ page 70).
u You want to de-register another handset:
¤ Touch ’ next to Registered Handsets. ¤ [ ø De-register]. ¤ Touch the
button next to the handset.
¤ [ ø De-register]. ¤ Enter system PIN.
¤ Press Ye s to confirm.
Locating a handset ("paging")
¤ Briefly press the register/paging key on the base (¢ page 8).
All the handsets ring simultaneously ("Paging"), even if the ringtones are deacti-
vated (Exception: Handsets where room monitor is activated).
Ending the search
¤ On the base: Press the register/paging key again briefly, or
¤ On the handset: Press c or a or touch [ ”Silence], or
¤ No action: After approx. 3 minutes, the paging call will end automatically.
1) On the base
¤ Press and hold the registration/paging key (¢ page 8) on the base
(approx. 3 seconds).
2) On the handset
¤ Start to register the handset as described in the user guide.
Please note
u An incoming external call will not interrupt the paging call.
u If there are already two internal connections between the handsets/to the
answering machine (Gigaset SL910A), then a paging call is not possible.
To Next Page
Loading...
