What to do if Siemens Measuring Instruments analyzer does not respond?
If your Siemens Measuring Instruments analyzer isn't responding, try the following: First, press the Reset button. Then, check the analyzer battery to ensure it's properly installed and connected; replace the battery if needed. If the analyzer still doesn’t respond after charging, contact your local administrator for assistance.
How to fix Siemens Measuring Instruments analyzer that doesn’t switch on?
If your Siemens Measuring Instruments analyzer doesn’t switch on, dock it in the docking station, ensuring the docking station is connected to a power supply. If it still doesn’t switch on, press the Reset button.
General| Brand | Siemens |
|---|---|
| Model | Healthineers Atellica VTLi |
| Category | Measuring Instruments |
| Language | English |
Describes the analyzer features and how to operate and maintain it.
Specifies the analyzer's purpose for measuring biomarkers in clinical and point-of-care settings.
Outlines essential safety and usage guidelines when testing patient samples.
Provides instructions for cleaning the analyzer using recommended guidelines.
Introduces the analyzer, docking station, service software, and test cartridges.
Describes the handheld point of care device that performs tests on samples.
Explains the capabilities of the docking station for the analyzer.
Details the functionality of the service software for analyzer management.
Information on disposable cartridges used for testing patient samples.
Covers materials, box contents, unpacking, and assembly instructions.
Identifies the physical controls on the side and top views of the analyzer.
Identifies the physical controls on the back and top views of the docking station.
Provides instructions for connecting the docking station to power and network.
Step-by-step guide for installing the analyzer's battery.
Explains the final setup step using the Service software.
Procedures for powering the analyzer on, off, and into standby mode.
Describes the procedures for docking and undocking the analyzer.
Explains the visual indicators for docking station operational status.
Overview of the touchscreen user interface for interacting with the analyzer.
Details the components and layout of the analyzer's Home screen.
Describes the display and components of the test result screen.
Explains common icons and buttons used throughout the analyzer interface.
Methods for inputting data such as Patient ID using the analyzer.
Instructions on how to use the barcode scanner for data entry.
Instructions for entering information using the virtual keyboard.
Procedures for logging into and out of the analyzer system.
References for further details on the Atellica VTLi Immunoassay Analyzer.
Crucial safety guidelines, biohazard protection, and contamination prevention.
Lists cited sources for the safety information provided in the guide.
Safety and handling precautions specific to testing patient samples.
Steps and considerations for preparing the analyzer and materials for testing.
Procedures for handling and preparing reagent cartridges for use.
Guidelines for collecting and preparing various types of patient samples.
Detailed step-by-step instructions for running a test on the analyzer.
Specific warnings and precautions to observe during the testing process.
An outline of the essential steps in a typical patient test procedure.
Methods for identifying and entering patient information for a test.
Instructions for correctly inserting the reagent cartridge into the analyzer.
Guidance on selecting the appropriate sample type for the test.
Procedure for applying the patient sample to the reagent cartridge.
How to access and interpret patient test results and their details.
Steps for safely removing and disposing of used reagent cartridges.
Process for completing a test, including accepting or rejecting results.
Instructions for running consecutive tests for the same patient.
Managing and reviewing patient test results after completion.
Accessing and reviewing historical patient test results.
Methods to filter and search test results by date, type, user, or cartridge.
Explains the purpose and importance of running quality control tests.
Rules and recommendations for performing quality control tests.
Step-by-step instructions for conducting a quality control test.
How to access and review the results of quality control tests.
Methods to filter and search quality control test results.
Procedure for registering and releasing new quality control lots for use.
Understanding analyzer messages and common troubleshooting steps.
Common issues encountered with the analyzer and their solutions.
General guidelines and important cautions for performing maintenance.
Essential safety precautions to follow during maintenance procedures.
Instructions for cleaning and disinfecting the analyzer system.
Detailed instructions for cleaning outer surfaces, sockets, and insertion areas.
Steps for disinfecting the analyzer system before shipping or servicing.
Guidelines for maintaining and caring for the analyzer's battery.
Procedure for replacing the analyzer's battery when capacity is reduced.
How to view the analyzer's serial number and firmware versions.
How to access and view the analyzer's IP, network, and software settings.
List of available orderable supplies and their part numbers.
Summarizes the design specifications for the analyzer and docking station.
Information on EMC compliance and precautions for the product.
States compliance with FCC Rules and Industry Canada standards.
References for IT security specifications for the analyzer system.
Guidelines for the proper disposal of the analyzer as hazardous waste.
Contact information for customer support and incident reporting.
Guidance on training requirements for system operators and administrators.
Describes symbols displayed in documentation, on the analyzer, and packaging.
Defines key terms used throughout the analyzer manual.
Lists and defines common abbreviations used in the manual.
Explains the Magnotech biosensor technology and the test process.
To Next Page