Need help?Do you have a question about the Siemens SITRANS FC430 with HART and is the answer not in the manual?
General| Type | Coriolis Mass Flowmeter |
|---|---|
| Measurement Principle | Coriolis |
| Fluid Types | Liquids and gases |
| Sensor Material | Stainless Steel, Hastelloy |
| Output Signal | 4-20 mA HART |
| Process Temperature Range | -50 to 200 °C |
| Process Pressure Range | up to 100 bar |
| Accuracy | ±0.1% of flow rate |
| Repeatability | ±0.05% of flow rate |
| Connection Types | Flange, Thread |
| Ambient Temperature Range | -40 to 60 °C |
| Housing Material | Stainless Steel |
| Approvals | ATEX, IECEx, FM, CSA |
| Diagnostic Functions | Self-diagnostics, process diagnostics |
To Next Page
