administration.fm
A31003-S2010-M100-10-7619, 27/08/2008
HiPath 2000/3000/5000 - OpenStage Family, Administration Manual
3-61
Administration
Transferring Phone Software, Application and Media Files
3.7.9 HPT Dongle Key
This key file is required for access to the HPT test interface.
3.7.9.1 FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.7.2, “Common FTP Settings”) are to
be used, Use default must be set to "Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• FTP Server address: IP address or hostname of the FTP/HTTPS server in use.
• FTP Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• FTP account: Account at the server (if applicable).
• FTP username: User name for accessing the server.
• FTP password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
Administration via WBM
File transfer > HPT dongle
To Next Page
Loading...
Need help?
General