Siemens iQ300 SN73HX42VG User Manual

en Basic operation
32
13.3 Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
▶ When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
1. To prevent water dripping on the
tableware, unload it starting at the
bottom and working up.
2. Check the washing tank and ac-
cessories for soiling and clean if
necessary.
→"Cleaning and servicing",
Page38
Basic operation
14 Basic operation
Basic operation
14.1 Switching on the appli-
ance
▶ Press ⁠.
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
▶ Press the right programme button.
a The programme is set and the pro-
gramme button flashes.
a The remaining running time of the
programme appears on the dis-
play.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
▶ Press the button for the relevant
additional function.
→"Additional functions", Page20
a The additional function is set and
the additional function button
flashes.
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠.
a "h:01" appears in the display.
2. Use to set the required start
time for the programme.
3. Press ⁠.
a This activates timer programming.
Tip:To deactivate timer program-
ming, press repeatedly until "h:00"
appears in the display.

Siemens iQ300 SN73HX42VG Specifications

General

Door color	Not applicable
Cord length	1.75 m
Control type	Buttons
Product size	Full size (60 cm)
Inlet hose length	1.65 m
Custom panel-ready	Yes
Outlet hose length	1.9 m
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Current	10 A
Connected load	2400 W
AC input voltage	220-240 V
AC input frequency	50-60 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9.5 L
Energy consumption per cycle	0.94 kWh
Cycle time	225 min
Noise level	46 dB
Drying system	Heat exchanger
Delay start (max)	24 h
Overflow protection	-
Dishwashing programs	60min 65°C, Auto 45-65°C, Eco 50°C, Favorite, Intensive 70°C, Quick
Number of place settings	13 place settings
Number of washing programs	6
Package weight	39000 g
Apps supported	Siemens Home Connect
Feet adjustment	60 mm
Automatic door opening	No

Weight and Dimensions

Depth	550 mm
Width	598 mm
Height	815 mm
Weight	36900 g
Depth with door open	1150 mm
Installation compartment depth	500 mm
Installation compartment width	600 mm
Installation compartment height (max)	875 mm