Siemens iQ300 SN73HX42VG User Manual

en Customer Service
50
Customer Service for a period of at
least 10 years from the date on
which your appliance was placed on
the market within the European Eco-
nomic Area.
Note:Under the terms of the manu-
facturer's warranty the use of Cus-
tomer Service is free of charge.
Detailed information on the warranty
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of
your appliance.
The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.
20.1 Product number (E-Nr.),
production number (FD)
and consecutive num-
bering (Z-Nr.)
You can find the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
The rating plate is located inside the
appliance door.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.
20.2 AQUA-STOP guarantee
In addition to warranty claims against
the seller under the purchase agree-
ment and in addition to our manufac-
turer's warranty, we offer compensa-
tion under the following conditions.
¡ If our Aqua-Stop system is defect-
ive and causes water damage, we
will make good the damage for
private users. To ensure protection
from water damage, the appliance
must be connected to the power
supply.
¡ The liability guarantee is valid for
the service life of the appliance.
¡ A claim can only be made under
the guarantee if the appliance has
been correctly installed and con-
nected with Aqua-Stop according
to our instructions; this also in-
cludes correctly fitting the Aqua-
Stop extension (genuine access-
ory). Our guarantee does not cover
defective supply lines or fittings up
to the Aqua-Stop connection on
the tap.
¡ If your appliance is fitted with
Aqua-Stop, you can in principle
leave your appliance unattended
during operation and the tap
turned on afterwards. The tap only
needs to be turned off if you are
away from home for a long period,
e.g. on holiday for several weeks.

Siemens iQ300 SN73HX42VG Specifications

General

Door color	Not applicable
Cord length	1.75 m
Control type	Buttons
Product size	Full size (60 cm)
Inlet hose length	1.65 m
Custom panel-ready	Yes
Outlet hose length	1.9 m
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Current	10 A
Connected load	2400 W
AC input voltage	220-240 V
AC input frequency	50-60 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9.5 L
Energy consumption per cycle	0.94 kWh
Cycle time	225 min
Noise level	46 dB
Drying system	Heat exchanger
Delay start (max)	24 h
Overflow protection	-
Dishwashing programs	60min 65°C, Auto 45-65°C, Eco 50°C, Favorite, Intensive 70°C, Quick
Number of place settings	13 place settings
Number of washing programs	6
Package weight	39000 g
Apps supported	Siemens Home Connect
Feet adjustment	60 mm
Automatic door opening	No

Weight and Dimensions

Depth	550 mm
Width	598 mm
Height	815 mm
Weight	36900 g
Depth with door open	1150 mm
Installation compartment depth	500 mm
Installation compartment width	600 mm
Installation compartment height (max)	875 mm